LAN TESTER FOR RJ45, RJ12, RJ11, RJ10

• LED indication
• advanced design for easy testing
• ability to test cables from a distance and in places that are not easily accessible
• automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs
• slow and fast test switch

This LAN tester for different cable types is indispensable in network installation and maintenance activities. This compact device can be used for testing network or telephone cables (RJ-45, RJ-11,12) and for most types of computer cables.

Multi Modular Cable Tester

Cable tester has auto scan capability for twisted pairs for shorts, opens and mis wirings.
USO 4/6/8 testing
RJ45/RJ12/RJ11 connector capability
Designed to test intentionally crossed pairs or straight through pairs
Remote terminator allows testing of already installed cables

LAN TESTER FOR RJ45, RJ12, RJ11, RJ10

LED indication
Advanced design for easy testing
Ability to test cables from a distance and in places that are not easily accessible
Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs
Alow and fast test switch

This LAN tester for different cable types is indispensable in network installation and maintenance activities. This compact device can be used for testing network or telephone cables (RJ-45, RJ-11,12) and for most types of computer cables.

LANsmart TDR Cable Tester

Incorporates of TDR (Time Domain Reflectometer) Technology Tests for shorts, opens, miss-wires, reversals, split pairs, and shield continuity Built-in PORTfinder to locate corresponding sockets on hub/switch Measures length on UTP and STP cable without remotes Velocity of Propagation Adjustable Calibrate ability for non-standard cables to increase measuring accuracy Locates problems in both meter (m) and feet (ft) standards Tone Generator sends signals to either all or selected pin conductor/s. Test results displayed in pin-to-pin/Wiremap format Compatible with any twisted pair of category 3/4/5 and 6 cables Battery operated, compact and easy to use.

Display: 122 x 32 Dot Matrix LCD (56mm x 29mm)
Connector Type: RJ45 (main & remote)
Accuracy: ± 2m < than 10m (± 6.56 Feet in < than 32.81 feet)
± 5% > 10m (32.81 feet) Approximate test range: 1-500m (3.28 – 1640.42 feet)
Split pair detection minimum 1m (3.28 feet)
Tone Generator: 1 KHz
Operating Temperature: 0˚C - 50˚C (32˚F - 122˚F)
Storage Temperature: -30˚C - 50˚C (-22˚F - 122˚F)
Humidity: 10% - 90%
Dimensions: 82 x 138 x 32 mm
Power Source: 3 x AAA Alkaline Batteries
Battery Life: 4 hours continuous use
Approved by:CE

LANsmart is a hi-tech, multifunctional network cable tester. In addition to detecting basic wire connections like open, short, miss-wired and split pairs, it can also measure the cable length using TDR (Time Domain Reflectometers) technology in real time. LANsmart displays the results in pin-to-pin format. When there is any open/short fault in the cable, LANsmart will detect, locate, and display the fault. LANsmart can also send out audio signals to help find the corresponding cables; users can also send out auto negotiation signals to find out the corresponding hub/switch ports.

LANSmart is compact, ergonomic, and easy to operate. Its advance functionalities and versatility make LANsmart an ALL-IN-ONE tester suitable for all professional technicians and installers.

LANID Pro

LANID Pro is an essential tool for verifying and troubleshooting local area networks. It is designed for network administrators to quickly diagnose problems during LAN installation and repair. With a simple push of a button, the LANID Pro will display the status of network devices, whither it is running a 10BASE-T or 100BASE-T network. Furthermore, the LANID Pro is equipped with Portfinder function to quickly identify the corresponding port location on the Switch/Hub. The compact design provides the user with optimum convenience and portability.

LANID Pro is equipped with Portfinder function, which helps easily locate the workstations and corresponding ports on the switch/hub. It is great for the wall plates that are labeled incorrectly.

Auto negotiation:
100BASE-Tx full duplex
100BASE-Tx half duplex
10BASE-Tx full duplex
10BASE-Tx half duplex
100BASE-T4

LANID Pro can provide:
Whether the link is up or not
Whether the device is transmitting a packet or not
Whether the device is working in full duplex mode or half duplex mode
Whether the device is operating in 100BASE-Tx, 10BASE-Tx or 100BASE-T4 mode
Whether a data transmission error has occurred
Locate the workstations and corresponding ports on the switch/hub

Power Source: DC 3V(AAA x 2pcs)
Power Consumption: 235mA
Operating Temp: 0˚C~50˚C
Storage Temp: -10˚C~60˚C
Humidity: 0 to 95%(non-condensing)
Dimension: 215mm x 37mm x 35mm
Safety Approval: CE

Network On Line Status Checker

# Incorporates TDR technology
# Tests for shorts, opens, miswires, reversals, split pairs, and shield continuity
# Built-in PORTfinder to locate corresponding sockets on hub/switch
# Measures length of UTP and STP cable without remotes
# Calibrated Velocity Propagation ability for non-standard cables to increase measuring accuracy
# Tone generator sends signals to either all or selected pin conductor
# Test results displayed in pin-to-pin/wiremap format
# Compatible with any twisted pair of category 3/4/5 and 6 cables

GIGA-X is an economical and versatile tool. It helps network administrators and installers to layout 10/100/1000 BASE-T network environments GIGA-X also allows for trouble-free development of new Switch/NIC Ethernet network devices for business expansion. Network installers and administrators will find that GIGA-X is the fastest yet simplest unit to detect, identify, and maintain their network environments. GIGA-X complies with existing IEEE standard

Network Net Mapper

• On-Line Test: Displays the Ethernet port status, Ping default router, Ping DNS Server and Ping user defined device...etc.
  
• Off-Line Test: Wiremap/Twised mapping/Cable length/Tone generator and Portfinder
  
• Reporting voltage and polarity if voltage is present on pin 4/5 (telephone line)
  
• Wire map for cables opened, shorted, reversed, crossed, split pairs, mis-wire, ad shield continuity
  
• Displays the Wiremap and cable faults with remote ID in one screen
  
• Measures twisted pairs, map. and length of Cat5, Cat5E and Cat6 cables without remotes
  
• Self-calibrating function allows for increased measuring accuracy when testing length of non-standard cables
  
• Displays measurements in both meters and ft.
  
• Port Finder function on locates corresponding socket on hub/switch
  
• Tone Generator sends 1K Hz tone on all pins with 4 tonalities
  
• RJ45 port protection from damage due to high voltage from telephone line
  
• Low battery indicator

The NETmapper is a unique and versatile tool for professional network administrators to quickly verifying network connectivity and get essential information from the entire network for troubleshooting. It in corporate both an online active network tester and an offline cable checker. It can also check for polarity and voltage of telephone lines. The NETmapper also has an analog tone generator and portfinder function for network cable and port identification.

ECG Wireless Inspection Camera

The new ECG WIC-1 Wireless Inspection Camera allows for easy visual inspections in hard-to-reach areas, even in total darkness or underwater, Flexible camera shaft has 2 super bright LEDs! Lightweight, handheld design with 3.28 ft. flexible shaft and useful accessories.

Let the ECG WIC-1 Wireless Inspection Camera with LCD Monitor be your eyes and hands while you look inside walls without tearing them apart, search behind appliances and other difficult places for lost items and hundreds of other uses. Allows for easy visual inspections in hard to reach places. The LCD Monitor has (1) Video Out Jack, AC Adapter Input, Brightness & Contrast control, Image Orientation

Typical applications for the WIC-1 include HVAC inspection, automotive inspection, cable routing, electrical and general contracting, home theater installation, plumbing inspection and anywhere else that you would use a standard borescope.

Whats Included:

• 1 - Detachable LCD Monitor
  
• 1 - 3.28Ft Flexible extension with camera
  
• 1 - Magnet Tip Attachment
  
• 1 - Hook Tip Attachment
  
• 1 - Mirror Tip Attachment
  
• 1 - Magnetic Monitor Base
  Optional WIC-4 3.28Ft extension cable is also available
  
  Camera Specifications:
  CMOS Imaging Sensor
  712 X 486 Pixels
  50 Degree Horizontal View Angle
  FM Modulation
  18MHz Bandwidth
  Requires (4) AA Batteries
  Weighs 1.7 pounds
  14 Degrees F-122 Degrees F Operating Temperature
  Camera diameter: 15.9mm/0.63 inches
  
  Monitor Specifications:
  2.36 Inch LCD Screen
  480 X 240 Pixels
  2468 MHz Transmission Frequency
  8V-36V DC Exterior Voltage Supply
  450Ma Current Consumption
  Weighs 0.31 pounds
  14 Degrees F-122 Degrees F Operating Temperature
  

NET Finder Plus

The NETfinder Plus is a versatile and convenient tester; it can test both network and telephone cables. The NETfinder Plus includes a tone generator, port finder, cable organizer and memorized quick tester.

The NETfinder Plus tests for all standard wiring faults and displays the results via a pin to pin method. The fault status is displayed on a large alphanumeric LED display and 9 additional LEDs indicate the corresponding tested wires.

Power Source DC 9V battery x 1pcs
Power Consumption 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimension 104mm x 63mm x 29mm
Remote 68mm x 32mm x 25mm
Organizer Remote 15mmx15mmx45mm
Safety Approval: CE

All-in-one tester: Tests network and telephone cables. Includes tone generator, port finder, cable organizer, and quick test.
Tests for the following wiring faults: Opened, shorted, reversed, crossed, and split pairs.
Pin to pin indication (net cable)
Tests for wiring faults of short and open (telephone cable)
Verification of shield/ground integrity
Multi-Split pair faults detection at 3M (9.8 Ft) to 150M (490 Ft) cable length
Cable organizer: 8 numbered remote IDs for organizing 8 cable locations.
Port finder: Locates the Switch/hub for the corresponding port.
Quick test: Memorizes a cables pin out and tests for mass cables.
Remote unit enables one person to test installed cables
Easy to read alphanumeric LED faults display

Net Finder Pro

NETfinder Pro is an expanded version of NETfinder. This Pro version adds the Cable Organizer function to allow it to work with up to 18 remote ID’s, which means it can identify hub/switch ports at the closet level, and to match cables at up to 18 different locations.

The Cable Organizer function enables identification of a larger number of mislabeled cables quickly and effortlessly.

Power Source DC 9V battery x 1pcs
Power Consumption 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimension 104mm x 63mm x 29mm
Safety Approval: CE

18 remote units for larger installation
Compact in size so everything fits into one pouch
Tests for wiring faults of open, short, reversed and crossed pairs
Verification of shield integrity
Specially designed remote unit that enables one person to test installed cables
Built-in Portfinder function to trace ports back to switch
Easy to read fault display and high speed testing
Low battery indicator

Net Finder

NETfinder is the newest generation of the LANTest family, with an advance circuit design surpassing the original technology. NETfinder is a perfect companion to network professionals and students, for commercial and residential applications.

NETfinder is designed to enhance users’ ability to quickly locate and verify the status of common and standard voice and data cables. It combines the functions of a convenient cable tester with a built-in low emission frequency “TONE” generator.

NETfinder is also equipped with PORTfinder functions to trace a cable back to the hub/switch. With NETfinder, cable tracing and testing is now ONE easy step.

Power Source: DC 9V battery x 1pcs
Power Consumption: 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimensions: 104mm x 63mm x 29mm
Remote:104mm x 30.5mm x 29mm
Safety Approved: CE

Tests for wiring faults of open, short, reversed and crossed
Verification of shield integrity
Specially designed remote unit that enables one person to test installed cables
Built-in Portfinder function to trace ports back to switch
Easy to read fault display and high speed testing
Low battery indicator
Tone Generator Features

LANTest Network Cable Tester

The LANtest is the simplest and most affordable wire-mapping device for networking cables available on the market. Use it to read the actual wiring configuration for Cat5; coaxial and modular telephone cables by comparing one transmitting end to another receiving end.

Cabling faults such as open wires, shorts, miswiring and crossed pairs are crystal clear with the LANtest’s unique LED display. Perform all the above tests on installed cables with the included remote terminator.

Power Source: DC 9V battery x 1pcs
Power Consumption: 22mA
Operating Temp: 0˚C~50˚C
Storage Temp: -10˚C~60˚C
Humidity: 0 to 95%(non-condensing)
Dimension: Main: 104mm x 63mm x 29mm
Remote: 104mm x 30.5mm x 29mm
Safety Approved: CE

Can test the correct pin configuration of 10Base-T 10Basc-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc
Easy to verify cable continuity, open, short and miss-wire
With remote kit, it can remotely test cable up to 1000 ft away either on wall plate or patch panel
Can test the grounding
Features with auto or manual scan for pin-out indicators
A power switch is provided for saving battery power

NETest Remote Network Cable Tester

The NETest™ network cable tester is a simple but comprehensive cable tester that will diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, and 100BASE-Tx, TIA-586A, TIA-568B & Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and miswiring, but also will identify up to 4 different cables from the tested end. With a push of a button, the NETest will automatically scan all wires and pairs to determine any existent faults.

A large alphanumeric LED displays the fault code; while a series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables, 4 remote terminators are provided. The terminators are also used to identify which cable is being tested. The NETest makes cable testing for multiple LAN interfaces virtually effortless.

Power Source: DC 9V battery x 1pcs
Power Consumption: 30mA
Operating Temp: 0˚C~50˚C
Storage Temp: -10˚C~60˚C
Humidity: 0 to 95%(non-condensing)
Dimensions: 115mm x 76mm x 36mm
Remote 68mm x 32mm x 25
Safety Approved: CE

High speed testing and detailed fault identification of UTP/STP and Coaxial cables
Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
Identifies shorted wires, open wires, crossed pairs, reversed pairs, split pairs and miswiring
Split pair detection: - Min. 1.2m (about 4 Feet) - Max. 150m (about 492 Feet)
Identifies up to 4 different cables with provided remote identifiers (256450)
Large alphanumeric LED clearly displays fault status.
Includes carrying pouch with belt loop

CABLE TESTER W TONE GENERATOR

Tone generator:
Working voltage: DC 9V ±15%
Working current: 10mA (intermittent tone) / 20mA (continuous tone)
Output wave form: square wave signals ±10Vpp
Single audio frequency: ± 900Hz
Dual audio frequency: ± 900Hz - 1000Hz< BR> Dimensions: 4.5" x 2.4" x 1.1"
Probe: Working voltage: DC 9V ±15%
Working current: 25mA (L) / 80mA (max. SP volume) / 100mA (max S&L volume)
max. reception sensitivity: > 30mV
• Maximum output volume: ±120dB
Dimensions: 8.1" x 1.6" x 1.5"

Features:
Network tester: consists of a tone generator and a probe
Method: use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
Signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
Tone generator output (square waveform): single (900Hz) or dual (900 - 1000Hz)
Comes with: soft carrying bag

8-Way Coaxial Cable Mapper

The 8 way coaxial cable mapper is designed to find and identify multiple coax cables.
It is a hand held device for CATV and security system installers who test multi run coax systems terminated with F connectors, or those who wish to map runs to a central bundle
It can be used to put a tone signal on a coax cable
With eight individual remote terminators, it is ideal for mapping coax installations.

Mini Pocket Tester Kit w/ Adapters

Mini Pocket Tester Kit includes:
NT-302 cable tester
F-81 F double female adapter
2 F double male adapter
2 RCA male to F-female adapters
2 RCA female to F-male adapters
2 BNC male to F female adapters
2 BNC female to F female adapters
2 RJ-11 adapters
2 RJ-45 adapters
5 F female to PAL female

NT-302 cable tester supports coaxial cable with F-connectors.
With the addition of a wide range of optional adapters, you can test telephone,LAN,audio,security or virtually any other type of wire or cable easily.

Fiber Checker Pro

Fiber Checker Pro Features:
• Wavelength: 650mm
  
• Range: visibility up to 3Km
  
• Easy to check fiber faults with visual red laser light
  
• Universally Connector for test different ST,SC,FC,FDDA interfaces
  
• Tests for both signle-mode and multi-mode cables with optional
  
• 2.5mm fiber optic connectors to 1.25mm adapter
  
• Highly effective power circuits allow for stable laser power
  
• Operates in both CW (Continuous wave) and pulse mode
  
• Dust-proof design-keeps fiber connectors clean
  
• Two AAA-size alkaline batteries provide 15 hours of stable continuous operation
  
• LED indicator for Power, Battery low, an CW/Pulse indicators

The FC-2005 Fiber Checker Pro is used for checking the defects of a fiber cable. It sends a visible 650nm wave length red laser light through a fiber optic cable, the breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
The universal connector can be used for the most common fiber interfaces such as ST/SC/FC/FDDA. It is suitable to test both single mode and multi mode cables.
With an optional 2.5mm to 1.25mm adapter, users can even test for 1.25mm fiber cables. The visibility is up to 3 kilometers.
There is also specially designed power circuit included; it provides steady power which avoids unstable laser output when the battery is low.
The output signal can be switched between CW or Pulse mode to get different visual effects. There is a dust proof cover which will prevent dust from getting into the inside of interface. The cover also helps avoid incidental exposure of the laser to your eye.

Fiber Checker

This item has been replaced by item number HB-FC2005.This pocket sized tool sends a visible red laser light though fiber optic cables. Breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area. The universal connector can be used for all the most commonly used fiber interfaces.

Smart Fiber Meter

• Simple to use and portable
  
• Calibrated at 850nm, 1310nm, and 1550nm
  
• Accuracy +0.15dBm(3.5%)
  
• Linearity: +0.05dBm in the range from -60 to + 3dBm
  
• Measurement units in dBm, and mW
  
• With self-calibrated ZERO function (0.0dBm)
  
• Ideal for both multi-mode and single-mode optical fibers
  
• With an optional 2.5mm to 1.25mm adapter, users can test both 2.5mm/1.25mm fiber cables
  
• Can send analog tone signal(270Hz, 1KHz, 2KHz) simultaneously for identification
  
• Battery low indicator and auto shut off function

The SmartFiber is an easy to use and lightweight fiber optic power meter that measure power of light transmitting from an optical fiber. It utilizes an InGaAs detector for improved sensitivity and temperature stability.
It tests for standard optical power from +3 to -60 dBm dynamic range with three calibrated wavelengths; 850nm, 1310nm, and 1550nm. The SmartFiber comes equipped with a 2.5mm universal adaptor which can be used for all the most common fiber interfaces such as ST/SC/FC/FDDA. It is suitable to test both single mode and multi-mode cables. With an optional 2.5mm to 1.25mm adapter, users can even test for 1.25mm fiber cables. The SmartFiber can also send analog tone signals (270Hz, 1KHz, 2KHz) simultaneously for identification purposes.

Fiber Optic Cleaner Kit

Kit includes:
• 1 x M.G. Chemicals Fiber Optic Cleaner (500 ml)
  
• 1 x Kimtech Precision Wipes (280 wipes per box)
  
• 1 x Dispensing Pump

The 8234-K Fiber Optic Cleaning Kit is designed for removing dust, lint, trace oils, and contaminates from fiber optics, connectors and tools. Clean your splicing tools thoroughly and frequently. When working with fiber, keep in mind that particles not visible to the naked eye could cause tremendous problems. Intensive cleaning of fiber and tools will save time and money down the road.
Features: Food Grade Bottles Having a cleaner filled into an optically clear 'food grade' bottles means that there is no contamination. This allows for an initial visual inspection of your cleaning solution, prior to any job. All production is performed under our ISO9001 Registered Quality System procedures.
Micro filtered alcohol The cleaner in our kit has been micro filtered to provide you with the purest possible cleaner. The last thing you need is a cleaner that can leave a mark on your fiber optics. A clean connection is critical for performance and functionality of any fiber optic link. The presence of dirt, dust, oil, and other contaminants can cause substantial signal loss.

Pros Kit Fiber Optic Tool Kit

Pros Kit Fiber Optic Tool Kit Includes:
Fiber optic visual fault locator
Foam swabs cleaning kit
Fiber optic viewing scope kit (SC/PC/FC)
Fiber optic viewing scope disk
Fiber optical stripper
Carbide Fiber scribe
(3)Fiber polishing disk
Universal syringe 2.5ml
8.7" Fiber optic crimping tool
Fiber optic Kevlar cutter
Deluxe compact tool case
Utility component storage box

Gale Corporation Pocket Toner

The best tool for identifying and basic testing of singular coax cables. Test for continuity and short circuits on coaxial cables in one easy step. Basic professional coaxial testing does not get any more compact and simple as PTNX1. This is the new NX version of the classic black Pocket Toner® first invented by Gale Corporation years ago. This new NX version features lightweight aluminum construction, a standard AAA battery, and new dual buzzers that audibly indicate continuity at both ends of the test cable. Like all Pocket Toner® NX test tools, the NX1 is now 100% low voltage protected so connecting it to live low voltage systems will not damage the tool.
This tool features:
2 Buzzers indicate continuity with loud tones (one buzzer in main unit and one in the toner unit)
Nickel-plated brass connection fittings (replaceable)
Low voltage circuit protection inside
Extra bright bi-colored LED (red=short, green=continuity)
For more product information on this Pocket Toner follow this link:
NX1 Pocket Toner Information Sheet
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

Gale Corporation Pocket Toner NX-2

The best tool for identifying and advanced testing of singular coax cables The individual PTNX2 is for the technician that works primarily with coaxial cable that wants a powerful but super-compact tool to fit in his or her pocket. In addition to testing for continuity and short circuits PTNX2 is packed with advanced features like indication of AC or DC voltage, 50-75 ohm terminators and auto shut-off to conserve battery life. PTNX2 instantly displays all test results on an easy to read 8-segment LED display as well as giving audible feedback at both ends of the test cable. Like all Pocket Toner® NX test tools, the NX2 is now 100% low voltage protected so connecting it to live low voltage systems will not damage the tool.
For the first time, test live cables (AC/DC 6v-48v) with confidence that the tool will not be damaged. Testing coaxial cables for continuity, shorts, 50-75 termination, and polarity and has never been easier!

This tool features:
Nickel-plated brass connection fittings (replaceable)
8-segment LED displays 5 different test results
Low voltage circuit protection inside (AC/DC 6v-48v)
Push-button power switch w/dust seal
Auto shut-off feature extends battery life
Toner unit “beeps” to indicate continuity with main unit

For more information on this Pocket Toner follow this link: NX2 Pocket Toner Information Sheet
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

Gale Corporation Pocket Toner NX2 Deluxe

Quick and easy identifying and advanced testing of coax cables in a versatile kit Just the adapters you need for quickly testing continuity, shorts, splitters, 50-75 ohm terminations and polarities in a compact hand-held case. Unique five-function 8-segment LED display as well as audio confirmation.
This expansive kit affords testing on home theater systems, audio systems, both cable and telephone installations, and much more. PTNX2 Deluxe provides an adapter for virtually any audio/video or telecom testing need conveniently stored in a durable compact canvas case.
Testing for continuity, shorts, 50-75 ohm termination, and polarity has never been easier! PTNX2 also now tests for the presence of both AC and DC voltages from 6v-48v.
The Deluxe Cable Kit includes:
Pocket Toner® NX2
66 Block adapter
RJ-11 adapter
RJ-45 adapter
Dial Tone DetectiveTM
Alligator clips & RJ-45 adapter
BNC-male adapter
BNC-female adapter
RCA-male adapter
RCA-female adapter
F-female coupler (F-81)
F-male coupler (F-71)
F-female coupler (Speed 81TM)
F-male push-on adapter
AAA battery
Deluxe case with belt clip
FEATURES:
• Low-voltage circuit protection (6v -48v) in main unit & toner unit
• Patented Gale Corporation adapters to test any wire or cable
• 8-Segment LED displays 5 different test results
• Audible indicators in both Main Unit & detachable Toner Unit
• Main Unit “beeps” when line condition changes
• Bi-gender Toner Unit w/removable Speed 81™ coupler
• Removable push-on F-type connector
• Nickel-plated brass connection fittings
• Lightweight and durable, anodized aluminum construction
• Push-button power switch w/dust seal
• Auto shut-off feature extends battery life
• Key high-wear parts are replaceable
• Uses 1 standard AAA battery
• One-year limited warranty

For more information on this Deluxe Pocket Toner Kit follow this link:PCTNX-DLX Pocket Toner Cable Tester Kit
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

Gale Corporation Pocket Toner Cable / Telephone

PTNX8 Cable & Telephone is the most popular kit used for “Triple Play” installations. This kit contains all the essential adapters for identifying and testing telephone and TV cables. Additionally, the small and effective Dial Tone Detective™ (DTD) can instantly indicate the presence of dial tone and proper polarity at a voice jack.
PTNX8 is the best tone and tag tool for testing continuity, shorts, 50-75 ohm termination, and polarity–on eight cables at once! Simply place each of the numbered ID caps on the remote ends of the cables to test then connect the main unit to the other end of the test cables one at a time. If there is continuity, the green LED on the ID cap will light and the main unit will show the ID cap’s number (1-8) on its digital display. In addition, the audible indicator in the main unit will emit a short tone. PTNX8 also tests for the presence of both AC and DC voltages from 6v-48v.

This kit includes:
Pocket Toner® NX8
8 ID caps
66 block adapter
RJ-11 adapter
Dial Tone DetectiveTM
Alligator clips & RJ-11 adapter
F-female coupler (F-81)
F-male coupler (F-71)
F-female coupler (Speed 81TM)
F-male push-on adapter
AAA battery
Deluxe case with belt clip

Features:
• Low-voltage circuit protection (6v -48v) in main unit, toner unit & ID caps
• Patented Gale Corporation adapters to test any wire or cable
• 8-Segment LED displays 5 different test results
• Audible indicators in both Main Unit & detachable Toner Unit
• LED indicators on all ID caps indicate continuity
• Main Unit “beeps” when line condition changes
• Test up to 8 cables at once
• Bi-gender Toner Unit w/removable Speed 81™ coupler
• Removable push-on F-type connector
• Nickel-plated brass connection fittings
• Lightweight and durable, anodized aluminum construction
• Push-button power switch w/dust seal
• Auto shut-off feature extends battery life
• Key high-wear parts are replaceable
• Uses 1 standard AAA battery
• One-year limited warranty

For more information on this Deluxe Pocket Toner Kit follow this link: Pocket Toner NX8 Cable & Telephone Kit
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

Gale Corporation Pocket Toner Satellite Installer

For the first time satellite installers can test for receiver voltage to confirm there is voltage present to power the devices at the dish! Another exciting exclusive Pocket Toner® NX series feature that satellite installers will find indispensable is voltage protection in both the main unit and the detachable toner unit. Now you not only use NX2 to test for the presence of AC/DC voltages, but you need not worry about destroying your Pocket Toner® by exposing it to voltages 6v-48v. Additionally, the small and effective Dial Tone Detective™ (DTD) can instantly indicate the presence of dial tone and proper polarity at a voice jack. Identify and test singular cables plus check for telephone dial tone - the perfect NX2 kit for satellite installers.
Another indispensable feature is that you can use your tool to test for the presence both AC/DC voltages without damaging your Pocket Toner® by exposing your tool to low voltages of 6v-48v.
The kit includes:
Pocket Toner® NX2
Dial Tone DetectiveTM
Alligator clips & RJ-11 adapter
F-female coupler (F-81)
F-male coupler (F-71)
F-female coupler (Speed 81TM)
F-male push-on adapter
AAA battery
Compact canvas belt case
Features • Low-voltage circuit protection (6v -48v) in main unit & toner unit
• Patented Gale Corporation adapters to test any wire or cable
• 8-Segment LED displays 5 different test results
• Audible indicators in both Main Unit & detachable Toner Unit
• Main Unit “beeps” when line condition changes
• Bi-gender Toner Unit w/removable Speed 81™ coupler
• Removable push-on F-type connector
• Nickel-plated brass connection fittings
• Lightweight and durable, anodized aluminum construction
• Push-button power switch w/dust seal
• Auto shut-off feature extends battery life
• Key high-wear parts are replaceable
• Uses 1 standard AAA battery
• One-year limited warranty

For more information on this Deluxe Pocket Toner Kit follow this link: Pocket Toner NX8 Satellite Installer Kit
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

Gale Corporation Lan Pro KIt

PTNX8 LAN Pro is equipped with the essential network adaptors (R-J45) to facilitate multiple-jack testing up to 8 at one time. When using Gale Corporation’s exclusive ID caps the LED on each ID cap will illuminate when network voltage is present, this provides valuable information for all installation and service technicians.
PTNX8 is the best tone and tag tool for testing continuity, shorts, 50-75 ohm termination, and polarity–on eight cables at once! Simply place each of the numbered ID caps on the remote ends of the cables to test then connect the main unit to the other end of the test cables one at a time. If there is continuity, the green LED on the ID cap will light and the main unit will show the ID cap’s number (1-8) on its digital display. In addition, the audible indicator in the main unit will emit a short tone. PTNX8 also tests for the presence of both AC and DC voltages from 6v-48v.

Kit Includes:
Pocket Toner® NX8
8 ID caps
66 block adapter
RJ-11 adapter
8 RJ-45 adapters
Dial Tone DetectiveTM
Alligator clips & RJ-45 adapter
BNC-male adapter
BNC-female adapter
F-female coupler (F-81)
F-male coupler (F-71)
F-female coupler (Speed 81TM)
F-male push-on adapter
AAA battery
Deluxe case with belt clip

Features • Low-voltage circuit protection (6v -48v) in main unit, toner unit & ID caps
• Patented Gale Corporation adapters to test any wire or cable
• 8-Segment LED displays 5 different test results
• Audible indicators in both Main Unit & detachable Toner Unit
• LED indicators on all ID caps indicate continuity
• Main Unit “beeps” when line condition changes
• Test up to 8 cables at once
• Bi-gender Toner Unit w/removable Speed 81™ coupler
• Removable push-on F-type connector
• Nickel-plated brass connection fittings
• Lightweight and durable, anodized aluminum construction
• Push-button power switch w/dust seal
• Auto shut-off feature extends battery life
• Key high-wear parts are replaceable
• Uses 1 standard AAA battery
• One-year limited warranty

For more information on this Deluxe Pocket Toner Kit follow this link:Pocket Toner NX8 Lan Pro KIt
Follow this link to view our Pocket Toner Adapters: Pocket Toner Adapters

E-851 HDMI Cable Tester (Type A)

The HDMI (High Definition Multimedia Interface)Cable tester is designed to check and troubleshoot the pin connections of HDMI cables.
It is ideal for testing the continuity of each pin of an HDMI cable prior to installation on equipment.

Features:

• Test all pins signal of HDMI cables
  
• LED indicator on both main unit and remote unit
  
• Automatic “on” and easy to operate
  

66 Block Adapter

66 Block Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

RJ-11 Adapter

RJ-11 Adapter for the NX Series Pocket Toner
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

RJ-45 Adapter

RJ-45 adapter for the NX Series Pocket Toner
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Dial Tone Detective

Dial Tone Detective for the NX Series Pocket Toner
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

2 Wire Clip Adapter

2 Wire Clip Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Alligator Clips & RJ-45 Adapter

Alligator Clips and RJ-45 Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Alligator Clips & RJ-11 Adapter

Alligator Clips and RJ-11 Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Alligator Clips & RCA Male Adapter

Alligator Clips and RCA Male Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Alligator Clips & RCA Female Adapter

Alligator Clips and RCA Female Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Alligator Clips Adapter

Alligator Clips Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

BNC Male Adapter

BNC Male Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

BNC Female Adapter

BNC Female Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

RCA Male Adapter

RCA Male Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

RCA Female Adapter

RCA Female Adapter for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

F-Female Coupler Adapter

F-Female Coupler (F-81) for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

F-Male Coupler (F-71)

F-Male Coupler (F-71) for the NX Series Pocket Toner.
To view our Gale Corporation Pocket Toners follow this link:Pocket Toners

Pros Kit Premise Pro Kit

Our Pros Kit Premise is a complete tool kit for data, telephone, video, satellite, cable TV, USB and security applications
The universal stripper & cutter will cut and strip 4-pair UTP/STP cable, flat satin cable, and RG59, RG6, RG6 Quad, RG7, RG8 and RG11 coaxial cable.
The universal modular crimp tool crimps 4-pin RJ22 handset plugs, 4 and 6 pin RJ11/12 telephone plugs, and 8-Pin RJ45 data plugs.
The universdal compression tool crimps waterproof compression "F", RCA and BNC connectors for RG59, RG6, RG6 Quad, RG7, RG8 and RG11 coaxial cable sizes.
Impact punch down tool terminates 110 and 66 panels and wall jacks.
8-Way modular adapter taps into data and telephone lines for monitoring and testing.
Universal cable tester has tone, trace and tests all video, satellite, cable TV, security, telephone, and data cables including USB, "F", RCA, BNC and Modular Plug cables.

Pros Kit Datago Kit

Pros Kit Datago tool kit features:
Complete data installation kit for the beginner.
The universal stripper will cut and strip 4-Pair UTP/STP cable and flat satin cable.
The modular plug crimp tool crimps 4-pin RJ22 handset plugs, 4 and 6 pin RJ11/12 telephone plugs, and 8-pin RJ45 data plugs.
The impact punch down tool terminates both 110 and 66 panels and wall jacks.
The cable mapper will test all data cables for continuity.
(10) RJ45 Cat-5E modular plugs included.

Pros Kit Data Tel Kit

Pros Kit DataTel kit features:
Complete tool kit for data, telephone and USB
The universal stripper cuts and strips 4-pair UTP/STP cable and flat satin cable.
The universal modular plug crimper crimps 4 and 6 pin RJ11/12 telephone plugs and 8 pin RJ45 data plugs>
The 8-way modular adapter taps into data and telephone lines for monitoring and testing
The universal cable tester for both USB and modular plugs tests for tone, trace for all telephone and data cables.
Detect 10Mb and 100Mb ethernet signals

Pros Kit VOIP Kit

Pros Kit VOIP Tool Kit features:
Complete tool kit for data, telephone and voice over internet protocol )VOIP) systems.
The universal stripper cuts and strips 4-pair UTP/STP cable and flat satin cable.
The impact punch down tool terminates both 110 and 66 panels and wall jacks.
The 8-way modular adapter taps into data and telephone lines for monitoring and testing
The modular plug crimp tool crimps 4-pin RJ22 handset plugs, 4 and 6 pin RJ11/12 telephone plugs, and 8-pin RJ45 data plugs.
The compression splice crimp tool crimps waterproof UR,UY and UG splices.
Butt-in Test Set troubleshoots voice, ethernet, and DSL systems.
6 in 1 can wrench and screwdriver set allows easy access to panels and racks.
Probe pick to safely probe and move connections.
Component box to store extra connectors and parts.

Pros KIt Satellite & Cable TV Compression Kit

Pros Kit Satellite & Cable TV Compression Kit features:
Complete tool kit for satellite and cable TV systems.
The universal stripper cuts and strips 4-pair UTP/STP cable and flat satin cable.
The 3-way "F" flaring tool easily attaches "F" connectors, to cable, and flare RG59, RG6, and RG6 Quad Cable Shields.
The compact compression tool crimps waterproof compression "F" connectors and flare RG59, RG6, and RG6 Quad Coaxial Cable.
Coaxial tone tester will tone, trace and test all satellite and cable TV "F" connector cables.

Pros Kit Pro Satellite & Cable TV Compression Kit

Pros Kit Professional Satellite & Cable TV Compression Kit features:
The universal stripper & cutter will cut and strip 4-pair UTP/STP cable, flat satin cable, and RG59, RG6, RG6 Quad, RG7, RG8 and RG11 coaxial cable.
Round cable cutter for small and large coaxial cables.
The 3-way "F" flaring tool easily attaches "F" connectors, to cable, and flare RG59, RG6, and RG6 Quad Cable Shields.
The universal compression tool crimps waterproof compression "F", RCA and BNC connectors for RG59, RG6, RG6 Quad, RG7, RG8 and RG11 coaxial cable sizes.
Coaxial tone tester will tone, trace and test all satellite and cable TV "F" connector cables.