NET Finder Plus

The NETfinder Plus is a versatile and convenient tester; it can test both network and telephone cables. The NETfinder Plus includes a tone generator, port finder, cable organizer and memorized quick tester.

The NETfinder Plus tests for all standard wiring faults and displays the results via a pin to pin method. The fault status is displayed on a large alphanumeric LED display and 9 additional LEDs indicate the corresponding tested wires.

Power Source DC 9V battery x 1pcs
Power Consumption 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimension 104mm x 63mm x 29mm
Remote 68mm x 32mm x 25mm
Organizer Remote 15mmx15mmx45mm
Safety Approval: CE

All-in-one tester: Tests network and telephone cables. Includes tone generator, port finder, cable organizer, and quick test.
Tests for the following wiring faults: Opened, shorted, reversed, crossed, and split pairs.
Pin to pin indication (net cable)
Tests for wiring faults of short and open (telephone cable)
Verification of shield/ground integrity
Multi-Split pair faults detection at 3M (9.8 Ft) to 150M (490 Ft) cable length
Cable organizer: 8 numbered remote IDs for organizing 8 cable locations.
Port finder: Locates the Switch/hub for the corresponding port.
Quick test: Memorizes a cables pin out and tests for mass cables.
Remote unit enables one person to test installed cables
Easy to read alphanumeric LED faults display

Net Finder Pro

NETfinder Pro is an expanded version of NETfinder. This Pro version adds the Cable Organizer function to allow it to work with up to 18 remote ID’s, which means it can identify hub/switch ports at the closet level, and to match cables at up to 18 different locations.

The Cable Organizer function enables identification of a larger number of mislabeled cables quickly and effortlessly.

Power Source DC 9V battery x 1pcs
Power Consumption 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimension 104mm x 63mm x 29mm
Safety Approval: CE

18 remote units for larger installation
Compact in size so everything fits into one pouch
Tests for wiring faults of open, short, reversed and crossed pairs
Verification of shield integrity
Specially designed remote unit that enables one person to test installed cables
Built-in Portfinder function to trace ports back to switch
Easy to read fault display and high speed testing
Low battery indicator

Net Finder

NETfinder is the newest generation of the LANTest family, with an advance circuit design surpassing the original technology. NETfinder is a perfect companion to network professionals and students, for commercial and residential applications.

NETfinder is designed to enhance users’ ability to quickly locate and verify the status of common and standard voice and data cables. It combines the functions of a convenient cable tester with a built-in low emission frequency “TONE” generator.

NETfinder is also equipped with PORTfinder functions to trace a cable back to the hub/switch. With NETfinder, cable tracing and testing is now ONE easy step.

Power Source: DC 9V battery x 1pcs
Power Consumption: 22mA
Operating Temp. 0˚C~50˚C
Storage Temp. -10˚C~60˚C
Humidity 0 to 95%(non-condensing)
Dimensions: 104mm x 63mm x 29mm
Remote:104mm x 30.5mm x 29mm
Safety Approved: CE

Tests for wiring faults of open, short, reversed and crossed
Verification of shield integrity
Specially designed remote unit that enables one person to test installed cables
Built-in Portfinder function to trace ports back to switch
Easy to read fault display and high speed testing
Low battery indicator
Tone Generator Features

LANTest Network Cable Tester

The LANtest is the simplest and most affordable wire-mapping device for networking cables available on the market. Use it to read the actual wiring configuration for Cat5; coaxial and modular telephone cables by comparing one transmitting end to another receiving end.

Cabling faults such as open wires, shorts, miswiring and crossed pairs are crystal clear with the LANtest’s unique LED display. Perform all the above tests on installed cables with the included remote terminator.

Power Source: DC 9V battery x 1pcs
Power Consumption: 22mA
Operating Temp: 0˚C~50˚C
Storage Temp: -10˚C~60˚C
Humidity: 0 to 95%(non-condensing)
Dimension: Main: 104mm x 63mm x 29mm
Remote: 104mm x 30.5mm x 29mm
Safety Approved: CE

Can test the correct pin configuration of 10Base-T 10Basc-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc
Easy to verify cable continuity, open, short and miss-wire
With remote kit, it can remotely test cable up to 1000 ft away either on wall plate or patch panel
Can test the grounding
Features with auto or manual scan for pin-out indicators
A power switch is provided for saving battery power

NETest Remote Network Cable Tester

The NETest™ network cable tester is a simple but comprehensive cable tester that will diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, and 100BASE-Tx, TIA-586A, TIA-568B & Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and miswiring, but also will identify up to 4 different cables from the tested end. With a push of a button, the NETest will automatically scan all wires and pairs to determine any existent faults.

A large alphanumeric LED displays the fault code; while a series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables, 4 remote terminators are provided. The terminators are also used to identify which cable is being tested. The NETest makes cable testing for multiple LAN interfaces virtually effortless.

Power Source: DC 9V battery x 1pcs
Power Consumption: 30mA
Operating Temp: 0˚C~50˚C
Storage Temp: -10˚C~60˚C
Humidity: 0 to 95%(non-condensing)
Dimensions: 115mm x 76mm x 36mm
Remote 68mm x 32mm x 25
Safety Approved: CE

High speed testing and detailed fault identification of UTP/STP and Coaxial cables
Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
Identifies shorted wires, open wires, crossed pairs, reversed pairs, split pairs and miswiring
Split pair detection: - Min. 1.2m (about 4 Feet) - Max. 150m (about 492 Feet)
Identifies up to 4 different cables with provided remote identifiers (256450)
Large alphanumeric LED clearly displays fault status.
Includes carrying pouch with belt loop

CABLE TESTER W TONE GENERATOR

Tone generator:
Working voltage: DC 9V ±15%
Working current: 10mA (intermittent tone) / 20mA (continuous tone)
Output wave form: square wave signals ±10Vpp
Single audio frequency: ± 900Hz
Dual audio frequency: ± 900Hz - 1000Hz< BR> Dimensions: 4.5" x 2.4" x 1.1"
Probe: Working voltage: DC 9V ±15%
Working current: 25mA (L) / 80mA (max. SP volume) / 100mA (max S&L volume)
max. reception sensitivity: > 30mV
• Maximum output volume: ±120dB
Dimensions: 8.1" x 1.6" x 1.5"

Features:
Network tester: consists of a tone generator and a probe
Method: use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
Signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
Tone generator output (square waveform): single (900Hz) or dual (900 - 1000Hz)
Comes with: soft carrying bag

8-Way Coaxial Cable Mapper

The 8 way coaxial cable mapper is designed to find and identify multiple coax cables.
It is a hand held device for CATV and security system installers who test multi run coax systems terminated with F connectors, or those who wish to map runs to a central bundle
It can be used to put a tone signal on a coax cable
With eight individual remote terminators, it is ideal for mapping coax installations.

Mini Pocket Tester Kit w/ Adapters

Mini Pocket Tester Kit includes:
NT-302 cable tester
F-81 F double female adapter
2 F double male adapter
2 RCA male to F-female adapters
2 RCA female to F-male adapters
2 BNC male to F female adapters
2 BNC female to F female adapters
2 RJ-11 adapters
2 RJ-45 adapters
5 F female to PAL female

NT-302 cable tester supports coaxial cable with F-connectors.
With the addition of a wide range of optional adapters, you can test telephone,LAN,audio,security or virtually any other type of wire or cable easily.