Fiber Checker Pro

Fiber Checker Pro Features:
• Wavelength: 650mm
  
• Range: visibility up to 3Km
  
• Easy to check fiber faults with visual red laser light
  
• Universally Connector for test different ST,SC,FC,FDDA interfaces
  
• Tests for both signle-mode and multi-mode cables with optional
  
• 2.5mm fiber optic connectors to 1.25mm adapter
  
• Highly effective power circuits allow for stable laser power
  
• Operates in both CW (Continuous wave) and pulse mode
  
• Dust-proof design-keeps fiber connectors clean
  
• Two AAA-size alkaline batteries provide 15 hours of stable continuous operation
  
• LED indicator for Power, Battery low, an CW/Pulse indicators

The FC-2005 Fiber Checker Pro is used for checking the defects of a fiber cable. It sends a visible 650nm wave length red laser light through a fiber optic cable, the breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
The universal connector can be used for the most common fiber interfaces such as ST/SC/FC/FDDA. It is suitable to test both single mode and multi mode cables.
With an optional 2.5mm to 1.25mm adapter, users can even test for 1.25mm fiber cables. The visibility is up to 3 kilometers.
There is also specially designed power circuit included; it provides steady power which avoids unstable laser output when the battery is low.
The output signal can be switched between CW or Pulse mode to get different visual effects. There is a dust proof cover which will prevent dust from getting into the inside of interface. The cover also helps avoid incidental exposure of the laser to your eye.

Fiber Checker

This item has been replaced by item number HB-FC2005.This pocket sized tool sends a visible red laser light though fiber optic cables. Breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area. The universal connector can be used for all the most commonly used fiber interfaces.

Smart Fiber Meter

• Simple to use and portable
  
• Calibrated at 850nm, 1310nm, and 1550nm
  
• Accuracy +0.15dBm(3.5%)
  
• Linearity: +0.05dBm in the range from -60 to + 3dBm
  
• Measurement units in dBm, and mW
  
• With self-calibrated ZERO function (0.0dBm)
  
• Ideal for both multi-mode and single-mode optical fibers
  
• With an optional 2.5mm to 1.25mm adapter, users can test both 2.5mm/1.25mm fiber cables
  
• Can send analog tone signal(270Hz, 1KHz, 2KHz) simultaneously for identification
  
• Battery low indicator and auto shut off function

The SmartFiber is an easy to use and lightweight fiber optic power meter that measure power of light transmitting from an optical fiber. It utilizes an InGaAs detector for improved sensitivity and temperature stability.
It tests for standard optical power from +3 to -60 dBm dynamic range with three calibrated wavelengths; 850nm, 1310nm, and 1550nm. The SmartFiber comes equipped with a 2.5mm universal adaptor which can be used for all the most common fiber interfaces such as ST/SC/FC/FDDA. It is suitable to test both single mode and multi-mode cables. With an optional 2.5mm to 1.25mm adapter, users can even test for 1.25mm fiber cables. The SmartFiber can also send analog tone signals (270Hz, 1KHz, 2KHz) simultaneously for identification purposes.

Fiber Optic Cleaner Kit

Kit includes:
• 1 x M.G. Chemicals Fiber Optic Cleaner (500 ml)
  
• 1 x Kimtech Precision Wipes (280 wipes per box)
  
• 1 x Dispensing Pump

The 8234-K Fiber Optic Cleaning Kit is designed for removing dust, lint, trace oils, and contaminates from fiber optics, connectors and tools. Clean your splicing tools thoroughly and frequently. When working with fiber, keep in mind that particles not visible to the naked eye could cause tremendous problems. Intensive cleaning of fiber and tools will save time and money down the road.
Features: Food Grade Bottles Having a cleaner filled into an optically clear 'food grade' bottles means that there is no contamination. This allows for an initial visual inspection of your cleaning solution, prior to any job. All production is performed under our ISO9001 Registered Quality System procedures.
Micro filtered alcohol The cleaner in our kit has been micro filtered to provide you with the purest possible cleaner. The last thing you need is a cleaner that can leave a mark on your fiber optics. A clean connection is critical for performance and functionality of any fiber optic link. The presence of dirt, dust, oil, and other contaminants can cause substantial signal loss.

Pros Kit Fiber Optic Tool Kit

Pros Kit Fiber Optic Tool Kit Includes:
Fiber optic visual fault locator
Foam swabs cleaning kit
Fiber optic viewing scope kit (SC/PC/FC)
Fiber optic viewing scope disk
Fiber optical stripper
Carbide Fiber scribe
(3)Fiber polishing disk
Universal syringe 2.5ml
8.7" Fiber optic crimping tool
Fiber optic Kevlar cutter
Deluxe compact tool case
Utility component storage box